醫用內窺鏡系統主要由設備系統與手術器械系統組成。手術器械系統主要按科室或手術名稱來分類。有各科使用的內窺鏡、專用器械、配合設備使用的手術器械和一次性手術耗材。這里就不詳細介紹了,下面
內窺鏡維修公司來講講設備系統的結構組成。
The medical endoscope system is mainly composed of equipment system and surgical instrument system. The surgical instrument system is mainly classified by department or surgical name. There are endoscopes, special instruments, surgical instruments and disposable surgical consumables used by various departments. I won't introduce it in detail here. Next, the endoscope maintenance company will talk about the structure of the equipment system.
在設備系統中我們通常可以分為：攝像顯像系統，影像記錄系統，光源系統，人工氣腹系統，液體加壓系統，電凝電切系統，動力消融系統，沖洗吸引系統等等。
In the equipment system, we can usually be divided into: camera imaging system, image recording system, light source system, artificial pneumoperitoneum system, liquid pressurization system, electrocoagulation and electrocautery system, dynamic ablation system, flushing and suction system, etc.
(1)攝像顯像系統：該系統包括顯示器和攝像機。顯示器有常規的CRT和液晶兩種，攝像機有單CCD和3CCD兩種。現在高端的使用客戶多是液晶顯示器配3CCD攝像器。
(1) Camera and imaging system: the system includes display and camera. There are conventional CRT and LCD monitors, and single CCD and 3CCD cameras. At present, most high-end customers are LCD with 3CCD camera.
(2)影像記錄系統：現在很多醫院都選擇以電腦為基礎的圖文工作站。該系統分兩部分：電腦硬件和圖文采集軟件。
(2) Image recording system: many hospitals now choose computer-based graphic and text workstations. The system consists of two parts: computer hardware and image and text acquisition software.
(3)源系統：又稱冷光源。冷光源燈泡中充有鹵素和氙氣兩種，其輸出功率為70-400W。現在300W氙光源是主流的產品。其突出特點是光線強烈，色溫5600-6000k，與太陽光類似，涵蓋了從紫外線到紅外線的整個波段。
(3) Source system: also known as cold light source. The cold light bulb is filled with halogen and xenon, and its output power is 70-400W. Now 300W xenon light source is the mainstream product. Its outstanding feature is strong light, color temperature 5600-6000k, similar to sunlight, covering the entire band from ultraviolet to infrared.
(4)人工氣腹系統：將氣腹機與二氧化碳鋼瓶連接好，并旋開鋼瓶上的閥門，然后開啟氣腹機，根據手術的需要，選擇壓力預設值，當腹腔內壓力超過或低于設定值時，全自動二氧化碳氣腹機可自動開始或停止注氣。
(4) Artificial pneumoperitoneum system: connect the pneumoperitoneum machine with the carbon dioxide cylinder, unscrew the valve on the cylinder, and then turn on the pneumoperitoneum machine. According to the needs of the operation, select the preset pressure value. When the intraperitoneal pressure exceeds or falls below the set value, the automatic carbon dioxide pneumoperitoneum machine can automatically start or stop gas injection.
This is the relevant content of the structure and composition of the medical endoscope system equipment system. If you have any doubts or needs about this, please come to our website http://www.veeker.xyz consulting service
新聞資訊
聯系我們
公司：匠仁醫療設備有限公司 
新聞資訊
