我們必須知道的是，工業內窺鏡的結構當中，有一個部分是非常容易出現損耗的，便是在鏡面上面。因此，我們在平時使用的過程中，除了要及時清洗以外，更重要的是不要用尖銳的物質在它的表面上劃動，一旦遭受了，這個劃痕是非常明顯的，如果力量比較大的話，出現碎裂的情況也是會有的，所以我們肯定是在這個方面要特別注意。
First of all, we must know that one part of the structure of industrial endoscope is very prone to loss, that is, on the mirror. Therefore, in the process of normal use, in addition to timely cleaning, it is more important not to scratch its surface with sharp substances. Once it is suffered, the scratch is very obvious. If the force is relatively large, there will be fragmentation, so we must pay special attention to this aspect.
在探測不同的物質之前，因為它們在外觀上以及內部構造上面都是有很大的區別，那么我們在轉換的時候，肯定是需要注意調整。
Before detecting different substances, because they are very different in appearance and internal structure, we must pay attention to adjustment during conversion.
不管是在置放還是拿取的過程當中，都應該輕拿輕放內窺鏡。
The endoscope should be handled with care whether it is placed or taken.
正確的方法就是相關人員手持物鏡的部位，這樣可以幫助鏡子防止出現意外落地、彎曲等情況產生。
The correct method is to hold the part of the objective lens by relevant personnel, which can help the mirror prevent accidental landing, bending, etc.

在使用工業內窺鏡完畢之后，應該先用干凈柔軟的布料清潔一下工業內窺鏡相關的線路，然后再重新綁定在繞線輪上。
After using the industrial endoscope, clean the circuit related to the industrial endoscope with a clean and soft cloth, and then rebind it on the winding wheel.
對于各種檢測工程當中出現的阻礙物，都不能硬拉扯內窺鏡。而是應該選擇巧妙的方法進行延伸，從而保證工業內窺鏡不會受到損壞。
For obstacles in various testing projects, the endoscope shall not be pulled. Instead, ingenious methods should be selected for extension, so as to ensure that the industrial endoscope will not be damaged.
對于工業內窺鏡的清潔以及保養，應該采取定期檢查和維護保養。
For the cleaning and maintenance of industrial endoscope, regular inspection and maintenance should be taken.
這樣不僅能夠及時發現該產品的故障以及其他問題存在，也能讓有效的保養維護措施，幫助產品延長使用時間。
In this way, not only the faults and other problems of the product can be found in time, but also effective maintenance measures can be taken to help the product prolong its service time.
這樣不僅可以讓產品的使用時間更加長久，也能讓各位使用者在后期工作過程當中，使用起來得心應手，不會存在各種故障問題。
This can not only make the use time of the product longer, but also enable users to use it easily in the later work process without various fault problems.